Fabtech Technologies Ltd is a global pharmaceutical engineering company, headquartered in Mumbai and listed as FABTECH. You work with one partner, one team, from concept design to qualification. That covers cleanrooms, HVAC, water systems and process equipment. We build oral solid dosage, injectable, biotech and API plants. Global bio-pharma companies build with us across Africa, the Middle East, South Asia and Latin America.
We choose the site for your plant, then clear the ground and make it level.
Site selection and developmentWe mark the plant layout on the ground, then build the foundations and the steel frame.
Civil and structural worksAbove the rooms, we install the air handling units and the pipes for water and steam.
HVAC and process utilitiesWe plan how clean each room must be, and how people and materials move through it.
GMP layout and zoningWe build the cleanroom walls, ceiling and doors, and lay the epoxy floor.
Cleanroom fit-outWe install the filling line and connect it to the air, water and power it needs.
Equipment installation and hook-upWe test every system, record the results, and hand over the plant.
Qualification and handoverThese are some of the companies we have worked for.
Fabtech designs and builds pharmaceutical plants, so that life-saving medicines can be made where they are needed, at a price people can afford.
One contract, a single point of responsibility. We deliver the whole plant as a pharmaceutical turnkey project, from engineering to handover.
Our key considerations guide explains how to plan one.
Before we order a single wall panel, we shape the layout to the standard of the market you will supply. That standard depends on where your medicine will be sold. The inspector's checklist is the first layer of the design.
HEPA filters remove fine particles from the air for each room. How often the air changes each hour depends on the room's class and the heat it makes. The clean air flows over the product wherever it is open. Your particle counts will show it on every batch record.
Each zone of the plant has its own class of cleanliness. People and materials move between zones through airlocks (small rooms) and pass boxes (wall cabinets). The air pressure steps down from the cleanest room and never flows backwards. We size the rooms for the hardest day of production.
Our systems make purified water by RO and EDI, two purification steps. They make WFI (water for injection, the purest grade) by multi-column distillation, and they make pure steam. Pipe loops carry them to every point of use, built to ASME BPE where the specification calls for it.
The time to build a new sterile plant is set at the design stage. It depends on the scope, the dosage form and the market you supply. One contract protects that date from delays between different suppliers.
We fix the standard your inspectors will check on day one. That standard shapes every design, every weld and every interlock. Our plants are built to withstand inspection under the USFDA (United States), MHRA (United Kingdom) and TGA (Australia) schemes.
We have delivered plants in Africa, the Middle East, South Asia, Latin America, Europe and North America. They make oral solid dosage (tablets and capsules), injectables, vaccines, biotech products and APIs (active pharmaceutical ingredients). The full list is on the projects page, with separate pages for the Middle East and Africa.
We supplied the modular cleanroom panels. The project also included the HVAC system and the electrical work.
Services used: Cleanroom systems, Cleanroom HVAC.
We designed and built operation theatres for Burjeel Hospital. Operation theatres are a kind of hospital cleanroom.
Type of plant: Hospital cleanrooms.
We delivered the cleanrooms, the HVAC and the clean utilities of Sudair Pharma's oncology facility as one turnkey project.
Services used: Pharmaceutical turnkey projects, Cleanroom HVAC.
Type of plant: Oncology manufacturing facility.
We supplied the cleanrooms, the HVAC system and the water and steam systems.
Services used: Cleanroom HVAC, Water and pure steam.
We supplied the modular cleanroom panels. The scope also included the doors, HVAC, electrical work, flooring and utility piping.
Services used: Cleanroom systems, Cleanroom HVAC.
Fidson Healthcare planned six dosage lines in one plant. Fabtech's contract covered the cleanrooms, HVAC, utilities, high purity water and laboratory.
Services used: Cleanroom systems, Cleanroom HVAC.
We delivered a turnkey project in three areas of the plant. The project included cleanroom equipment and a purified water system.
Services used: Pharmaceutical turnkey projects, Water and pure steam.
We delivered cleanroom systems and HVAC for a research and development facility. We completed the project within one year, during the pandemic lockdown.
Services used: Cleanroom systems, Cleanroom HVAC.
The Mechnikov project is a vaccine manufacturing facility. The project had already started when we took responsibility for it. We commissioned it.
Type of plant: Turnkey biopharmaceutical facilities.
At Fidson in Nigeria, the client planned six dosage lines in one plant. Fabtech's contract covered the cleanrooms, HVAC, utilities, high purity water and laboratory. Sudair Pharma in Saudi Arabia is an oncology facility. We delivered its cleanrooms, HVAC and clean utilities as one turnkey project. Mechnikov in Nicaragua is a vaccine plant. We have also built a BSL-3 (biosafety level 3) laboratory.
“They did a fantastic job on site. They have very good engineers, and the leadership of this company is amazing.”
“We appreciate Fabtech's dedication and cooperation. The support we received from the entire team has enriched our experience.”
Injectables are medicines given with a needle. They must be sterile, which means free of all living germs. We build sterile fill-finish lines for vials, ampoules and syringes. We supply the vial filling machine, the syringe filling machine and the sterility test isolator. Our guide to aseptic filling explains how sterile filling works. See how we design a sterile injectable facility.
Vaccines and biosimilars are made with living cells. The room protects both the product and the workers, so its air pressure differs from a tablet plant. We have built a BSL-3 laboratory. Mechnikov in Nicaragua is a vaccine plant planned at about 9,000 square metres, as its case study states. See biosafety level 3 installations. Read about our turnkey biopharmaceutical facilities.
Oncology medicines treat cancer. They are so strong that a very small amount can harm the people who make them. We build contained suites for cancer medicines. Isolators, sealed cabinets with gloves set into the wall, keep the product away from the operator. Read about our oncology projects. See how an oncology manufacturing facility is laid out.
Oral solid dosage means medicines you swallow: tablets, capsules, granules and powders. Liquids include syrups and suspensions. We build these plants and supply the process equipment, such as granulators, fluid bed processors and tablet coaters. Fidson Healthcare in Nigeria planned six dosage lines in one plant. Fabtech's contract covered the cleanrooms, HVAC, utilities, high purity water and laboratory. See our approach to oral solid dosage facility design.
Operation theatres and hospital cleanrooms follow a different standard from a medicine plant. A hospital also cannot close while the work is done. Our guide to HVAC and cleanroom panels for hospital operation theatres explains the design. We designed and built operation theatres for Burjeel Hospital in the UAE.
We also build plants for ointments and creams, veterinary medicines, and medical devices such as IV cannulas, syringes and rapid diagnostic test kits. See all the industries we build for.
Fabtech Technologies Ltd is a listed public limited company. Its registered office is in Andheri West, Mumbai, and it trades on the stock exchange as FABTECH.
The company first offered its shares to the public in a public issue (IPO). Its offer documents are in the investors section: the draft red herring prospectus, the red herring prospectus and the prospectus. The annual reports, financial results, shareholding pattern and intimations to the stock exchange are there too. We add announcements, newspaper articles and events as they are published. For investor contact, see investor grievance.
Fabtech Technologies Cleanrooms Ltd is a separately listed group company. It has its own listing, its own board and its own reports. If you want to buy cleanroom products or installation in India, please contact that company. This website covers international turnkey plants and the equipment that goes inside them.
Several businesses that are not connected to us also use the name Fabtech. People who search for "Fabtech Technologies Private Limited" or "Fabtech Engineering Private Limited" are often looking for one of them. Fabtech Projects & Engineers is a different company. The American FABTECH metal-forming exhibition is a trade show.
We design and build pharmaceutical, biotech and healthcare manufacturing plants under a single turnkey contract. We cover everything from the feasibility study to the first batch you can sell: concept and detailed design, the cleanrooms, HVAC, water systems, process equipment, automation, installation and qualification.
We are the listed engineering company in Mumbai that trades as FABTECH. Other businesses also use the name, and they are not connected to us: Fabtech Projects & Engineers, the companies people search for as "Fabtech Engineering Private Limited", and the American FABTECH metal-forming exhibition.
Yes, it is listed as FABTECH. The offer documents from the public issue are in the investors section of this website, with the annual reports, financial results and shareholding pattern.
It is a separately listed group company, with its own listing and its own website. For cleanroom products and installation in India, go to fabtechcleanroom.com. This website covers international turnkey plants and the equipment that goes inside them.
We build plants for the pharmaceutical industry: injectables and sterile products, vaccines and biosimilars, oncology (cancer medicines), and oral solid dosage and liquids. We also build for ointments and creams, veterinary medicines and medical devices, and we build hospital cleanrooms and HVAC. The engineering is shared. Each room's standard and regulator change.
We design to US FDA cGMP, EU GMP Annex 1 and WHO GMP. Our plants are built to withstand inspection under the USFDA (United States), MHRA (United Kingdom) and TGA (Australia) schemes. We fix your market's standard at the design stage and follow it in every design, weld and interlock.
We are headquartered in Mumbai. Delivered projects include Sudair Pharma in Saudi Arabia, Mechnikov in Nicaragua, Fidson in Nigeria and an isolator project for Umicore in Argentina. We have also worked in Egypt, Kenya, Bangladesh and Sri Lanka.
Ashwani Kumar Singh is the Chief Executive Officer. Hemant Mohan Anavkar is Promoter and Executive Director. Naushad Alimohmed Panjwani is an Independent Director and chairs the board.
Yes. A brownfield expansion is work on a plant that is already running. We plan it around your live production, with phased shutdowns, temporary containment and re-validation, so that output continues while the plant grows.
The time is fixed at the design stage. It depends on the scope, the dosage form and the market you will supply. We use a single turnkey contract to protect that timeline from delays between different suppliers.
You will talk to the engineers who would design and build it. Reach them through our contact page.
Start a conversation
