Cleanroom partitions & HVAC
Modular Cleanroom Partitions & HVAC Cleanroom Solutions
Fabtech is a pioneer in making Cleanrooms affordable to all, without compromising on the quality. We specialize in designing, manufacturing and supplying modular panels to construct walls and walkable and non-walkable ceilings.
With over 2 decades of experience around the world and the ability to set up facilities to handle highly potent products like hormones, cytotoxics and biotech molecules, Fabtech has made a mark in manufacture and setup of facilities with global standards. Most of our facilities have been inspected and approved by global regulatory authorities like the US FDA, MHRA and TGA.
To build a Cleanroom, major coordination is required between the HVAC contractor and modular panel installation team. Here, both services are under one roof, ensuring all coordination is handled effectively and efficiently.
Through our in-house capabilities of detailed engineering, installation, commissioning, validations and documentation, we provide end-to-end solution for all HVAC needs of the project.
Fabtech provides factory equipments that ensure quality and efficiency:
Roll forming machine: It is used for decoupling of PPGI/PCGI coil having the auto program setting. It can also be used to produce tray for the panel with different widths. The maximum & minimum width which can be produced is 1220 mm & 385 mm respectively.
Amada brake press: This is a NC controlled semi auto machine used for bending of the component. We can bend sheets of various thickness by changing the die & punch.
Amada punch press: This is a fully automatic machine having 30 turret punch station, programs can be loaded through SD card by using AP-100 Software, and we can punch 0.5 mm to 6 mm sheet on it.
Puf machine: This is a high pressure machine used to fill mixture of Isocynate and Polyol in a specified ratio. It is used to fill insulation into hollow panel by inserting mixture of Isocyante and Polyol. Hydraulic press is used to press panel as per curing time of panels. Machine has an output of 0.8kg/sec.
Powder coating line: We have fully automatic programmed 2 guns on both sides & conveyor with gas fired oven to coat different shades of powder. It consists of cleaning zone, preheating zone, powder coating booth and oven. We have a conveyor system for the movement of an object.
Pre Insulated panel machine: It is a continuous panel making machine. We can use Puf slab, Rockwool, Thermo coal as insulation in it. A two component bonding adhesive arrangement is provided in this machine; the line speed of which can be controlled. Fitment between two panels is done by Tongue & Groove design of panel. In-built heating system is provided in it.